 |
The EIBA is pleased to acknowledge the following Official Partners
& Suppliers
|
Changes to Crystal Mark Third Edition
December 2016
| Law D2 |
Bias side of a bowl: the side of the bowl that is the more rounded of
the two sides, which is identified by the small grooved rings
surrounding its centre.
Each set of bowls can carry a player’s
individual emblem, logo or engraving as a distinguishing mark on both
sides of every bowl.
|
| Law 52.1.3 |
|
52.1.3.1 |
The distinguishing
marks must be the same design and colour but can be different in
size. |
|
52.1.3.2 |
The distinguishing
mark on the bias side of the bowl must be inside the smallest
grooved ring surrounding its centre. |
52.1.3.3
|
If there are grooved
rings surrounding the centre of the non-bias side, the
distinguishing mark must be inside the smallest ring. |
52.1.3.4
|
If there are no
grooved rings surrounding the centre of the non-bias side, the
distinguishing mark must be inside the indentations designed to
help the player grip the bowl during delivery. |
52.1.3.5
|
As well as the distinguishing marks, each set of bowls can
carry a player’s name or signature. Imprints on the running surfaces of
bowls must be avoided.
|
| Law 52.1.8.4 |
| All bowls
belonging to players within a team or side must have these markings on
them and the markings must all be the same design and colour. However,
players may use markings which are different in size from those used by
other players in their team or side where this is necessary due to
differences in the sizes of either the manufacturers’ rings or
distinguishing marks on the bowls. |
| Law 53.1 |
Licensed Manufacturers
and Licensed Testers are entitled to imprint the registered World Bowls
Stamp on the bias side of bowls. Imprints on the running surfaces of
bowls must be avoided wherever possible.
|
April 2018
| Laws 52.1.6.1 and 52.1.7.1 |
| 52.1.6 |
Bowls made of wood must: |
|
52.1.6.1 |
measure between 112 millimetres and 134
millimetres across at their widest points; and |
|
52.1.6.2 |
weigh up to 1.59 kilograms. |
|
52.1.7 |
Bowls made of rubber or plastic resin
must: |
|
52.1.7.1 |
measure between 112 millimetres and 131
millimetres across at their widest points; and |
|
57.1.7.2 |
weigh up to 1.59 kilograms |
Updated 24th October 2018
|
|
